My Cart

Close

Cabernet - Half Lite - Alder Doors

$ 1,999.00 $ 2,100.00

30 Day Money Back Guarantee

Description

Handmade arched top door in knotty alder with full-lite glass. Purchase unstained or add one of 5 rustic stain colors.

These pre-hung doors are made in the USA, and include casings and door jambs. They include low-E glass, Q-lon weather stripping and automatic door bottoms. All door hinges come pre-installed.

Specs
  • 30" (w) x 80" (h) x 1 3/4" (d)
  • Rough Opening: 32" x 82"
  • Available in 5 stain colors
  • Automatic Door Bottom
  • Weather Sealed Jambs
Features

Our Premium quality handmade doors are built to keep your cellar cool. We include an automatic door bottom to ensure that there is a seal to keep drafts to a minimum, as well as weather sealed jambs to ensure a tight fit.

Our doors are made using Cope & Stick Dowel construction using Type I (Exterior) glue in both the joints and the dowels. The dowels are made of solid butcher block grade wood.

Door Hinge Options

Our doors come pre-hung. You can select from an oil-rubbed bronze finish, a satin-nickel finish, or a polished brass finish.

Door Stain Options

Our doors come finished or unstained. The stained doors use a multi step process in which the beauty of the natural wood is enhanced.

Unstained doors take 15 days to ship, stained doors take an additional 15 days as your door is made specifically for you.

Door Swing Options

This infographic shows how your door will open into or away from your cellar. Use this to determine which option to choose.

Door Jamb Options

This determines the width of the casing surrounding your door. Use the 4 9/16" for 2x4 construction & 6 9/16" for 2x6 construction.

Door Casing Options

Door casings are the trim that seperates the door frame from the wall, and provides a decorative touch to your entranceway.

Door Handles

You can add a beautiful handleset to your cellar door. We offer three color options, oil-rubbed bronze, satin-nickel , or polished brass finish, which will match the hinge color selected. These also come in three different styles. The Cortina, Hamilton Mortise, and Electric Keypad.

Door Grates

We also offer three different styles of grates on your cellar door. The styles are shown above.

Gallery
Warranty

One Year Limited Factory Warranty

Premier Wine Cellars door products are guaranteed against defects in materials and workmanship which could negatively affect their performance under normal conditions and usage for a period of one year from date of shipment from the factory.

What is Covered

Premier Wine Cellars warrants all doors sold under this warranty (except those expressly excluded from this warranty), at time of shipment to be of good material and free of defects which would render said doors unserviceable or unfit for their ordinary recommended use. This extends to the original purchaser or their customer only. This warranty excludes abuse, neglect, lack of maintenance and normal wear and tear expected with implied, intended use.

Exclusions

(1) Unsatisfactory service or appearance caused by failure to follow recommended "Handling, Job Finishing and Installation Instructions" appearing below this warranty;

(2) The appearance of field finished doors is not covered by this warranty;

(3) Natural variations in the color or texture of the wood;

(4) The warranty against warp does no apply to the following:

  • (a) all 1 3/4" thick stile and rail doors wider than 3‘0" and higher than 7‘0";
  • (b) doors with face veneers of different species or doors with different finish products on opposite faces;
  • (c) doors that are improperly hung or do not swing freely;
(5) Any delamination caused by failure to protect and seal all exposed surfaces of the door.

 

Warranty Claims

If a door is determined to be defective, written notice must be sent to the manufacturer as soon as possible. The manufacturer will not be liable for any door repaired or replaced without its prior consent. Upon notice of the defect and/or inspection by our representative we will at our option:

(1) Repair the door(s) without charge;

(2) Replace the door(s) without charge;

(3) Refund the price of the door(s).

The manufacturer will perform its obligations under this warranty within 30 days after the purchaser receives an appropriate notice. Action on any claim for warp may be deferred at the option of the manufacturer for a period not to exceed 12 months from the date of the claim. If a door has been installed prior to making a claim, the door must remain hung in the original installation during the period of deferment to permit conditioning to humidity and temperature. This warranty gives specific legal rights, and other rights may vary from state to state.

 

Installation

Cellar Door Handling, Job Finishing and Installation Instructions

Deliver door(s) to building site after plaster or cement is dry. If doors are stored at job site for more than one week, all edges should be sealed

Handle with clean gloves and do not drag doors across one another or across other surfaces.

Store flat on a level surface in a dry, well-ventilated building. Cover to keep clean, but allow air circulation.

Doors should not be submitted to: abnormal heat, extreme dryness, humid conditions or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.

Doors should not be submitted to: abnormal heat, extreme dryness, humid conditions or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.

The utility or structural strength of the door must not be impaired in the fitting of the door, the application of hardware, or cutting and altering the door for lights, louver, panels or any other special details.

For exterior doors, use three hinges on doors 7‘0" in height or less, and four hinges on doors over 7‘ in height.

For all interior doors use three hinges, except two hinges may be used for 1 3/8" doors weighing less than 50 pounds or 6‘8" or less in height. All doors 7‘6" or higher require four binges. Allow a fitting clearance of 1/16" on the binge side and 118" on the lock side.

Where installed for outward swing with no protection from the elements, doors must be properly protected by flashing or other suitable means.

Before finishing. remove handling marks or effects of exposure to moisture with a thorough, final sanding over all surfaces of the door using a 3/0 or 5/0 sandpaper and clean before applying sealer or finish. Some species of wood contain a chemical (oak particularly) which reacts unfavorably with certain finishes. Where possible, the surface should be tested for such favorable reactions.

Application of a sealer before finishing will usually prevent this difficulty. The full beauty of wood is best emphasized by the use of a satin or semi-gloss finish.

Immediately after fitting, or cutting for closures, weatherstrip and/or threshold, and before hanging any interior or exterior door on the job, the entire door, including the top and bottom edges, must receive an application of a primer and two coats of a good grade of paint, varnish or lacquer.

Adequate drying time must be allowed between coats. For job site finishing, do not use a water-thinned paint unless an oil base prime coat is first applied. Exterior finishes shall be used on the exterior face and all edges of exterior doors.

Hello You!

Enter your email address for stock alerts, discounts, promotions and more!

SEARCH THIS STORE